Biamp EQ2828 User Manual

Serial Control of the Advantage VRAM _______________________________________________________________________________________Biamp Systems, 10074

Serial Control of the Advantage VRAM 9# read-current-device-settings Description: The Advantage VRAM stores the settings of its pre-amp, volume, log

Serial Control of the Advantage VRAM 10$ write-current-device-settings Description: When used in conjunction with the read-device-settings command,

Serial Control of the Advantage VRAM 11& addressable-control-button-emulation Description: The Advantage VRAM and Advantage VRAMeq can be contro

Serial Control of the Advantage VRAM 12 ( bitwise-operator (firmware dates 7/23/98 and later) Description: Many of the settings available on the Adv

Serial Control of the Advantage VRAM 13) increment-decrement-memory (firmware dates 7/23/98 and later) Description: Sometimes it is desired to adju

Serial Control of the Advantage VRAM 14* polling-status Description: In order to give the user a glimpse into the current status of the Advantage VR

Serial Control of the Advantage VRAM 15Example: command: response: 8002* 292:2;00000303 In this example, a Advantage VRAM (device number 2) r

Serial Control of the Advantage VRAM 16+ sleep-for-10-seconds Description: The sleep-for-10-seconds command allows the Advantage VRAM and Advantage

Serial Control of the Advantage VRAM 17, read-eeprom-locations Description: Specifying the read-eeprom-locations command causes the Advantage VRAM a

Serial Control of the Advantage VRAM 18- write-eeprom-locations Description: The write-eeprom-locations command allows the user to write directly to

Introduction This document contains information for the serial control of the Advantage VRAM (Variable Resource Auto Mixer) and the Advantage VRAMeq,

Serial Control of the Advantage VRAM 19. set-baud Description: The set-baud rate command allows the user to specify the baud rate at which the Advan

Serial Control of the Advantage VRAM 20/ get-version Description: The get-version command causes the Advantage VRAM and Advantage VRAMeq to return t

Serial Control of the Advantage VRAM 21O0x4Fbutton 14N0x4Ebutton 13M0x4Dbutton 12L0x4Cbutton 11K0x4Bbutton 10J0x4Abutton 09I0x49button 08H0x48button 0

Serial Control of the Advantage VRAM 22 Address Used for storage of Byte Controls Value Ranges Corresponds to 0 0 0 Auto (gated) to main status

Serial Control of the Advantage VRAM 232 2 34 gain, phantom, hpf Ch.3 See note 3 See note 3 2 3 35 gain, phantom, hpf Ch.4 See note 3 See no

Serial Control of the Advantage VRAM 244 ; 75 High Ch. 3 0 to 30 -9 dB to 9dB with 0 dB at 15 4 < 76 Bass Ch. 4 0 to 30 -9 dB to 9dB with

Serial Control of the Advantage VRAM 25 Attenuation Table value dB 0 -801 -402 -353 -304 -255 -206 -197 -188 -179 -1610 -1511 -1412 -13

Serial Control of the Advantage VRAM 26Note 1 [Config bits]) High bit indicates the presence of the following (from lsb to msb) bit 1- last mic ho

Serial Control of the Advantage VRAM 2Serial Interface - Data Communications Parameters The Advantage VRAM communicates through its serial port at fo

Serial Control of the Advantage VRAM 3control should be implemented by waiting for the echo of each character before transmitting the next character.

Serial Control of the Advantage VRAM 4Advanced Control The Advanced Control command set includes more powerful commands to allow more flexible contro

Serial Control of the Advantage VRAM 5As mentioned earlier, the Advantage VRAM will echo all characters it receives, regardless of whether or not the

Serial Control of the Advantage VRAM 6The Advantage VRAM will only respond to Advanced Control commands if bit 7 of the Device Type Bitmask parameter

Serial Control of the Advantage VRAM 7! store-as-preset Description: The Advantage VRAM and Advantage VRAMeq each allow up to 17 different presets.

Serial Control of the Advantage VRAM 8" retrieve-preset Description: The retrieve-preset command configures the Advantage VRAM and Advantage VR