Biamp AudiaVOIP User Manual

Biamp Systems, 9300 SW Gemini Drive, Beaverton, Oregon 97008 U.S.A. (503) 641-7287 www.biamp.comAudiaVOIPOperation ManualJuly 2012

10CONNECTING TO A NETWORKED SYSTEM Connecting via Ethernet switch: Attach a “straight-through” Ethernet cable from the PC’s 10/100 Base-T netw

11CONNECTING TO A NETWORKED SYSTEM8. Connect to the network with Audia software. Open the Audia software. Connect to the network by going to File

All AudiaVOIP units ship from the factory with an assigned IP address of 192.168.1.101 . When using morethan one device in a system, each device must

13AudiaVOIP SPECIFICATIONSPhantom Power: +48 VDC (7mA/input)Input Gain Range (variable trim): 0dB ~ +66dBSampling Rate: 48kHzA/D - D/A Converters:

14WARRANTYBIAMP SYSTEMS IS PLEASED TO EXTEND THE FOLLOWING 5-YEAR LIMITED WARRANTY TO THE ORIGINAL PURCHASER OF THE PROFESSIONAL SOUND EQUIPMENT DESCR

15FCC COMPLIANCEFCC NOTICE - CLASS B DIGITAL DEVICE This equipment has been tested and found to comply with the limits for a Class B digital device, p

16COMPLIANCE DoC DSPA201207 EC Declaration of Conformity Biamp Systems Corporation, as manufacturer having sole responsibility, hereby declares tha

17COMPLIANCERoHS COMPLIANT This Biamp product, including all attendant cables and accessories supplied by Biamp, meets all requirements of EU Direc

2IMPORTANT SAFETY INSTRUCTIONSIMPORTANT SAFETY INSTRUCTIONS Important Safety Instructions_Speaker Terminals 1) Read these instructions. 2) Keep the

3TABLE OF CONTENTSAUDIAVOIP ... 4Features ... 4REAR PAN

4AudiaVOIPAudiaVOIP AudiaVOIP is a dedicated version of AudiaFLEX NC, the benchmark in digital audio systems for demanding professional sound installa

5AudiaVOIP REAR PANELAudiaVOIPAudiaVOIP comes precongured with 4 mic/line inputs, 12 AEC inputs, 4 line outputs, 2 amplied outputs and 2 VoIP lines.

6EXAMPLE CONFIGURATIONSerial Control Port100-240V~50/60Hz150 WattsCobraNet® connections onlysecondaryU.S. pat. no. 4,922,536primarylinkRemote Control

7CONNECTING TO A NETWORKED SYSTEM1. Install Audia software on a Windows PC. Download from here: http://www.biamp.com/products/audia/downloads.aspx2.

8CONNECTING TO A NETWORKED SYSTEMThe Local Area Connection Properties Dialog will open. Double-Click Internet Protocol Version 4 (TCP/IPv4).The Local

9CONNECTING TO A NETWORKED SYSTEM4. Connect the PC to the network. There are two ways to connect a PC and AudiaVOIP system together. Direct