Biamp A4 User Manual download pdf (Page 93)

Component Objects

Processing Library or from the Object Toolbar. To access Input 4 Channel

settings, double-click over the corresponding block in the Layout. This opens a

Control Dialog Box which provides all available settings.

Device IO indicates which hardware

input is associated with that software

channel. Gain In compensates for

different input levels (mic or line), and

should be set so Peak In flashes only

occasionally (6dB headroom). Phan

Pwr assigns +48 Volt phantom power

to the input for condenser

microphones. Mute In turns the input

signal on/off. Level (dB) In adjusts the

relative input volume. Invert In

reverses the polarity of the input

signal.

Right-clicking over certain settings will

provide a menu of additional options.

Each NEXIA PM comes pre-

configured from the factory with a

default system design

. If you wish to

load your own custom designed

configuration you will need to

reset/initialize

the unit(s) first.

PM Input (Stereo) 12 Channel

NEXIA PM hardware is always represented in the Layout as three separate

blocks, two for input connections and one for output connections. Between

these blocks can be placed virtually any of the other available NEXIA

mixing, routing, and processing blocks (component objects). Like other

component objects, NEXIA PM blocks can be placed into the Layout either

from the Processing Library

or from the Object Toolbar. To access Input

(Stereo) 12 Channel settings, double-click over the corresponding block in

the Layout. This opens a Control Dialog Box which provides all available

settings.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 216 217

No comments

Biamp A4 User Manual Page 93