Biamp A4 User Manual download pdf (Page 121)

Component Objects

Mic Options opens a separate control dialog box to

establish global settings.

Designated Mic On / Last Mic Hold determines which

microphone (if any) will stay/become active when no

signal is present. Logic Outputs Follow Mic Logic

assigns logic outputs to follow Designated Mic On / Last

Mic Hold. Open Mic Limits enables (and designates) a

maximum allowable number of active microphones.

Right-clicking over Ch / Bus assignments allows selection

of two additional dialog boxes.

Channel Settings affects individual channel settings,

but may be applied to all channels. Manual turns on/off

channel gating. NOM Gain turns on/off channel

contribution to NOM (number of open mics) attenuation.

Direct Output designates channel direct output signal

as Post Gate / Pre NOM, Post Gate / Post NOM, or Off.

(Direct Outputs must be enabled when placing Auto

Mixers from the Object Toolbar.) Set All causes current

Channel Settings to be applied to all channels. Off

Attenuation determines the amount of attenuation

applied when channel is inactive. Gate Hold Time

determines length of time before channel becomes

inactive, once signal is no longer present.

Logic Outputs affects individual Logic Output settings, but

may be applied to all Logic Outputs. (Logic Outputs must be

designated when placing Auto Mixers from the Object

Toolbar). Logic Output selects Follow Gate, On, or Off

condition of the Logic Output. Invert reverses operation of

the Logic Output (off when channel active). Set All causes

current Logic Output settings to be applied to all channels.

107

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 216 217

No comments

Biamp A4 User Manual Page 121